Filter
Top Products
26
Maxima
www.pridemobility.com
VI. COMFORT ADJUSTMENTS
TILLER ANGLE ADJUSTMENT
Your scooter is equipped with a pivoting tiller that allows adjust-
ment to several positions.
1. Lift the tiller adjustment lever. See figure 10.
2. Move the tiller to a comfortable position.
3. Release the tiller adjustment lever to secure the tiller in
position.
SEAT ROTATION ADJUSTMENT
The seat rotation lever secures the seat in one of four positions. See
figure 11.
1. Push the seat rotation lever down to disengage the seat.
2. Rotate the seat to the desired position.
3. Release the seat rotation lever to fix the seat securely in place.
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the scooter’s seat forward or backward to one
of three settings to adjust the distance between the seat and the
tiller. See figure 11.
1. Remove the seat from your scooter. See VII. “Disassembly
and Assembly.”
2. Remove the four bolts that fasten the seat to the seat platform.
3. Align the seat platform with the desired set of holes on the seat.
4. Install the four bolts securely.
ARMREST WIDTH ADJUSTMENT
The armrests can be adjusted inward or outward. See figure 12.
1. Loosen the armrest adjustment knobs at the back of the seat frame.
2. Slide the armrests in or out to the desired width.
3. Tighten the armrest adjustment knobs.
The armrests also pivot upward to make getting onto and off of
your scooter easier.
ARMREST HEIGHT ADJUSTMENT
The height of both armrests can be adjusted upward or downward.
See figure 12.
1. Loosen the two setscrews located on the armrest receiver.
2. Raise or lower the armrest to the desired height.
3. Tighten the setscrews to secure the armrest.
WARNING! Remove the key from the key switch
before adjusting the tiller or the seat. Never
attempt to adjust the tiller or the seat while the
scooter is in motion.
Figure 10. Tiller Adjustment Lever
Figure 11. Seat Adjustments
SEAT ROTATION LEVER
SEAT BOLTS
Figure 12. Armrest Adjustments
TILLER
ADJUSTMENT
LEVER
ARMREST
HEIGHT
ADJUSTING
SETSCREWS
ARMREST
KNOB