Filter
Top Products
2. Fastening the unit to the factory radio mounting bracket.
(Fig. 16) (Fig. 17)
Select a position where the screw holes of the bracket and
the screw holes of the head unit become aligned (are fit-
ted), and tighten the screws at 2 places on each side. Use
either truss screws (5 × 8 mm) or flush surface screws
(5 × 9 mm), depending on the shape of the screw holes in
the bracket.
Fig. 16
Fig. 17
11
13
12
10
18
ENGLISH FRANÇAIS
Screw
Dashboard or Console
Factory radio mounting bracket