Filter
Top Products
11
DFS Alarm Installation
ALARM SENSOR (White/red)
The white/red lead is a negative triggered (Grounding) input that can be connected to vari-
ous separately sold shock or glass sensors. There is no limit as to how many sensors are
connected, so you can ensure total protection of your vehicle. Follow the makers instruc-
tions as to installation and wiring.
Note:
• If the shock sensor detects vehicle vibrations, use the negative (–) output type. If you use the positive
(+) output type, the alarm will sound continually, and the shock sensor will not operate correctly.
Shock Sensor
(Ensure proper sensitivity adjustment in
accordance with maker’s instructions.)
Glass Sensor
This Product
White/yellow (refer to “DOOR SWITCH”.)
Brown (refer to “ALARM OUTPUT”.)
Blue/brown (refer to “STARTER CUT-OFF”.)
White/orange (refer to “DOOR LOCK”.)
White/red
•
To ensure full proper operation of DFS Alarm, Pioneer suggests using only white/red
wire, electronic sensors capable of providing a pulse width greater than 64 ms.
Fig. 7