Filter
Top Products
12
ENGLISH FRANÇAIS
DOOR LOCK (White/orange)
The white/orange lead should be connected to the “unlock” lead for your vehicles door
locking system, so that when you open the driver’s door by your vehicle’s remote control,
your Pioneer DFS Alarm is deactivated.
First, locate the two wires from the lock/unlock switch that operate the factory door lock
solenoids for the driver’s side. Using a meter, determine which lead is used to unlock the
door; connect this to the white/orange lead of your Pioneer Car Stereo. In the DFS Alarm
Setting Menu, select the door-lock system type according to your vehicle (grounding or
non-grounding).
If you have difficulty wiring this connection, please consult your nearest Installation spe-
cialist.
Note:
•
If your vehicle is equipped with a central door lock but the glass or shock sensor is not connected, if
the window is broken and the central door lock is released, this unit’s DFS Alarm will not operate.
• Pioneer recommends that both a shock sensor and glass sensor be installed when you are using the
“Remote Disarming” feature.
Fig. 8
Lock Solenoid
Switching
Relays
Lock
Unlock
Lock/Unlock
Switch
This Product
White/yellow (refer to “DOOR SWITCH”.)
Brown (refer to “ALARM OUTPUT”.)
Blue/brown (refer to “STARTER CUT-OFF”.)
White/orange
White/red (refer to “ALARM SENSOR”.)