Filter
Top Products
3-30
(2): Press this button to play the other side
of the tape.
(4): Press this button to reverse the tape rapidly.
Press it again to return to playing speed. The radio will
play the last selected station while the tape reverses.
You may select stations during REV operation by
using TUNE.
(6): Press this button to reduce background noise.
DOLBY NR ON will appear on the display. Press it
again to turn Dolby off.
Dolby Noise Reduction is manufactured under a license
from Dolby Laboratories Licensing Corporation. Dolby
and the double
-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
EQ: Press EQ to select the desired preset equalization
setting while playing a cassette. The equalization will
be automatically set whenever you play a cassette tape.
SEEK: Press the up or down arrow to search for
the next or previous selection on the tape. Your tape
must have at least three seconds of silence between
each selection for SEEK to work. You can skip nine
selections up or down on the tape. Choose how many
selections you want to skip. Press the SEEK arrow that
many times. The number of selections to be skipped will
appear on the display.
SCAN: Press and hold one of the SEEK arrows for
more than two seconds until SCAN appears on the
display and you hear a beep. Your tape must have at
least three seconds of silence between each selection for
SCAN to work. Use SCAN to listen to each selection for
a few seconds. The tape will go to the next selection, stop
for a few seconds, then go on to the next selection. Press
this button again to stop scanning. The sound will mute
and SCAN will appear on the display while scanning.
AM
-FM: Press this button to play the radio when
a tape is in the player. The tape will stop but remain in
the player.
CD
-TAPE: With a tape in the player and the radio
playing, press this button to play a tape. Press AM
-FM
to return to the radio when a tape is playing. Press
CD-TAPE to switch between the tape and compact disc
if both are loaded. The inactive tape or CD will remain
safely inside the radio for future listening. The display
will show TAPE and CD icons.
: Press this button located to the right of the
cassette slot to remove the tape. The radio will play.
EJECT may be activated with either the ignition or radio
off. Cassettes may be loaded with the radio and ignition
off if this button is pressed first.