Filter
Top Products
2-54
Installing the One Piece Boot
1. From inside the vehicle, pull the tab on the rear seat
to fold down the seat. See “Fold
-Down Rear Seat” in
the Index.
2. Open the trunk and remove the boot. Leave the
trunk open.
The boot attachments for the one piece boot are the
same as the boot attachments for the three piece boot
at the quarter trim panel and the trunk lid opening.
The boot attachment for the one piece boot is unique
at the rear seat back.
3. Gently pull the boot flap and place it over the striker
which is located near the center of the rear
pass-through opening.
4. Close the trunk lid.