Filter
Top Products
2-53
5. Unsnap both boot side cover snaps (E and F) from
the side of the quarter trim panel.
6. Lift the side cover eyelet (C) at the rear of the side boot
cover from the snap ball stud (D). Raise the back of the
boot side cover to unhook the tab (A) from the slot (B) in
the quarter trim panel. Do the same on the other side.
7. Store both boot side covers in the trunk.
8. Close the trunk.
9. Raise the rear seatback to the up position. Push the seat
back to make sure it is latched. Ensure that the rear
seatbelts do not become trapped behind the rear seats.