Filter
Top Products
56
FEATURES AND CONTROLS
Master Cylinder
The master cylinder (1) is on the right-hand
handlebar. Check the brake fluid level before
each ride. The fluid level can be seen
through thesight glass (2) on the side of
the master cylinder.
Maintain the fluid level at or slightly above
the mark (3) near the center of the sight glass.
Do not overfill.
NOTE: When checking the fluid level, the ATV must be on level ground with the
handlebars straight. If the fluid level is low add DOT 4 brake fluid only. Do not
overfill. See page 183 for the part numbers of Polaris products.
2
1
3