Filter
Top Products
36
FEATURES
Instrument Cluster (Digital/Analog)
Rider Information Center
The information center can be controlled by either the MODE button on
the instrument cluster or by the MODE/SET switch on the left
handlebar. Setting changes must be made with the engine running or
with the vehicle powered by an external DC power supply connector.
Use the MODE button or the MODE switch to toggle through the
available modes. Use the SET switch on the handlebar to save changes.
The information center is set to display standard units of measurement
at the factory. To change to metric, see page 37.
Information Display Area
This area displays either engine speed, engine temperature or maximum
vehicle speed.
Odometer/Engine Hour Display
This area displays the odometer, trip meters and engine hours.
MODE/SET Switch
S
E
T
M
O
D
E
MODE
Button
Trip 12
RPM
ODO
Odometer/Engine Hour
Display
Information
Display