Filter
Top Products
21
SAFETY
Safety Labels and Locations
Warning labels have been placed on the snowmobile for your protection.
Read and follow the instructions of the labels and other warnings on the
snowmobile carefully. If any of the labels depicted in this manual differ
from the labels on your snowmobile, always read and follow the
instructions of the labels on the snowmobile.
If any label becomes illegible or comes off, contact your POLARIS
dealer to purchase a replacement. Replacement safety labels are
provided by POLARIS at no charge. The part number is printed on the
label.
Clutch Warning/Belt Removal
This warning label is found on the oil bottle:
WARNING
Do not operate engine with hood or side
panels open.
Do not attempt adjustment with engine
running.
Do not operate engine with the clutch
guard removed.
Never run engine with drive belt removed.
Never service clutches yourself. See your
dealer.
BELT REMOVAL - ALL UNITS
1. For electric reverse models, engine
must be stopped in forward to allow clutch opening.
2. Install L-wrench from the tool kit into the open threaded hole in the driven
clutch.
3. Turn the L-wrench clockwise to open the sheaves and replace the belt.
Return the L-wrench to the tool kit.
SEE OWNER’S MANUAL FOR SHEAVE WIDTH ADJUSTMENT
PROCEDURE.
7176327
Clutch Warning/Belt Removal