Filter
Top Products
68
MAINTENANCE
Engine O il
Always check and change the engine oil at the intervals outlined in the
Periodic Maintenance Chart beginning on page 62. Always change the
oil filter whenever changing oil.
Premium 4 Synthe tic Oil
Polaris Premium 4 All Season Synthetic engine oil has been specially
formulated for use in Polaris 4-cycle engines. Polaris recommends the
use of Premium 4 in this engine, but use of any API certified “SH” oil
is allowable as long as it’s 0W-40. Oil may need to be changed more
frequently if Polaris Premium 4 is not used. F ollow the manufacturer’s
recommendations for ambient temperature operation.
See page 113 for the part numbers of Polaris products.
CAUTION
Mixing brands or using a non-recommended oil may cause
serious engine damage. We recommend the use of Polaris
Premium 4 All Season synthetic oil or API certified “SH” oil,
0W-40. Never substitute or mix oil brands.
Oil Check
1. Position the ATV on a level surface.
2. Start the engine and let it idle for 20-30 seconds. Stop the engine.
3. Remove the dipstick (1), which
is located on the left side of the
vehicle.
4. Wipe the dipstick dry with a
clean cloth. Reinstall it and
screw it completely in.
NOTE: The dipstick must be
screwed completely in to
keep the angle and depth
of the stick consistent.
5. Remove the dipstick
and read the oil level.
Maintain the oil level in
the normal operating
range (2). Do not overfill.
1
ADD 8 OZ. NORMAL FULL
2