Polaris 500 Offroad Vehicle User Manual


 
44
OPERATION
Pre-Ride Inspection
WARNING
If a proper inspection is not done before each use, severe injury
or death could result. Always inspect the vehicle before each use
to ensure it’s in proper operating condition.
Pre-Ride Checklist
Item Remarks See
Page
Brake system / lever travel Ensure proper operation 34, 76
Brake fluid Ensure proper level 35
Auxiliary brake Ensure proper operation 77
Front suspension Inspect, lubricate if necessary 66
Rear suspension Inspect, lubricate if necessary 66
Steering Ensure free operation --
Tires Inspect condition and pressure 83
Wheels / fasteners Inspect, ensure fastener tightness 82
Frame nuts, bolts, fasteners Inspect, ensure tightness --
Fuel and oil Ensure proper levels 68
Coolant level (if applicable) Ensure proper level 86
Coolant hoses (if applicable) Inspect for leaks --
Throttle Ensure proper operation 33, 78
Indicator lights / switches Ensure operation 31, 32
Engine stop switch Ensure proper operation 31
Drive chain Check condition / slack, lubricate as
needed
74, 84
Air filter, pre-filter Inspect, clean 90
Air box sediment tube Drain deposits whenever visible --
Headlamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
88
Brake light / tail lamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
89
Riding gear Wear helmet, goggles, protective
clothing
30