Polaris 419C Offroad Vehicle User Manual


 
97
Emission Control Systems
Exhaust Emission Control System
The emissions from the exhaust of this vehicle are controlled by engine design, including factory-set fuel delivery
and ignition. The engine and related components must be maintained at POLARIS specifications to achieve opti-
mal performance.
Engine idle speed is the only adjustment POLARIS recommends that the operator perform. Any other adjust-
ments should be performed by an authorized POLARIS dealer.
The emissions label is located on the clutch cover or engine case near the clutch box.
The installation of devices that effectively increase exhaust emissions beyond their legal limits will void all man-
ufacturer warranties and may violate laws governing the registration and operation of this vehicle.
Electromagnetic Interference
This spark ignition system complies with Canadian ICES-002.
This vehicle complies with the EMC requirements of European directives 97/24/EC and 2004/108/EC.
Non-ionizing Radiation: This vehicle emits some electromagnetic energy. People with active or non-active
implantable medical devices (such as heart monitoring or controlling devices) should review the limitations of
their device and the applicable electromagnetic standards and directives that apply to this vehicle.