Filter
Top Products
93
Operation
Driving Through Water
4. After driving through water, dry the brakes by applying light pressure to the levers
(while moving) until braking action is normal. If you do not perform this procedure, your
brakes may be ineffective.
NOTICE: Serious engine damage can result if the vehicle is not thoroughly inspected after operating
in water deeper than the footrest level. As soon as possible, perform the inspections and
maintenance services outlined in the periodic maintenance chart beginning on page 98.
Engine oil, gearcase oil, front and rear gearcases (if equipped) and all grease fittings need
special attention.
If the vehicle tips or overturns in water, or if the engine stops during or after operating in
water, restarting can result in serious engine damage. Transport the vehicle to your dealer
for service before restarting the engine. If this is not possible, follow the vehicle immersion
inspection and drying procedures outlined on page 118, then see your dealer for service at
the first opportunity.