Filter
Top Products
37
THE PERFECT FIT
Edge 136 Rear Suspension Adjustments
(Indy 340 Touring and Sport Touring)
Rear Spring Tension
To adjust rear torsion spring tension, rotate the three-position cam
using the engine spark plug tool.
Different rate torsion springs are available if a firmer ride is desired.
Contact your dealer for more information.
The following information is provided only as a guideline to be used
for initial suspension set-up. Your set-up may vary based on your
desired riding style.
A-Lowtension
B - Medium tension
C - High tension
Indy Select Rear Shock
The Indy Select rear shock allows for adjustments to the compression
valving. Locate the adjustment screw (A) near the base of the shock.
In half-turn increments, turn the screw clockwise to increase
compression valving and stiffen the ride, or counterclockwise to reduce
compression and soften the ride. There are approximately three full
turns of adjustment available.
If bottoming continues
after the screw has been
turned fully clockwise,
the torsion spring should
be adjusted (see page 37).
Return the screw to its
original starting position
after the torsion spring
has been tightened.
C
AB
A