Filter
Top Products
31
THE PERFECT FIT
Front Suspension Adjustments
For the best ride, the suspension should be adjusted to use the full
travel of the shocks wi th occasional light bottoming. To determine if
your machine is using full travel, push the jounce bumper down on the
shock rod until it contacts the body and test ride the machine. The
bumper will move up on the rod in relation to the amount of travel that
was used during the ride. If the travel is full, the bumper will be seated
at the top of the rod.
Shock Absorber Components
1. Retainer
2. Shock Rod
3. Jounce Bumper
4. Body
5. Threaded Spring Preload Adjuster Nut
Always verify ski alignment before making adjustments to the
IFS. See page 114 to c heck alignment. If the s kis a re misaligned,
see your dealer, as the camber adjustment m ay also be affected.
WARNING
1
2
3
4
5