Filter
Top Products
Northstar M121/M84 Installation and Operation Manual 71
Factory reset
This option returns all of the Instrument settings
(except the language, waypoints and routes) to
the default factory settings shown on the setup
menus.
About
The about window shows:
• The software version and date.
• The world chart version.
• Any card fitted.
• The number of waypoints, routes and tracks
you have stored.
• Connector wiring information.
In the unlikely event of having to contact a
Northstar dealer for service, quote the software
version number and date.
Sonar
Disable any sonar transducer and disable
sonar functions.
A sonar transducer is fitted. Enable sonar
operation.
See section 19-3.
Radar
No appropriate Radar system is fitted.
Disable RADAR.
An appropriate Radar receiver is fitted.
Enable AIS.
See section 19-4.
19-1 Setup > System
Press
MENU
twice, then select System:
Language
Select the language for the windows. The
options are: English, Italian, French, German,
Spanish, Dutch, Swedish, Portuguese, Finnish
and Greek.
Tip: In case you can’t read the current
language, the language setting is found at the
top of the system menu.
Backlight
Select the backlight level for the keys and
display (see also section 2-3)
Night mode
Night mode sets the palette for all windows
Normal palette, for daytime
All windows have a palette optimized for
night time.
See also section 2-3. To change only the chart
palette, see section 19-2.
Beep volume
Select the beep volume for key presses.
Auto power off
See section 2-2.