Filter
Top Products
Northstar M121/M84 Installation and Operation Manual14
To show one of the main windows full-size, press
DISPLAY
and select the window.
2-7 The main windows
Note
1 The windows available depend on the optional sensors and instruments that are installed (see
section 1-1).
2 Set up commonly used windows as favorites and press
to switch between windows (see
section 2-7-2).
2-6 Simulate mode
In Simulate mode, the Instrument ignores data
from the GPS antenna and other transducers
and sensors and the Instrument generates this
data itself. Otherwise, the Instrument functions
normally.
There are two simulate modes:
• Normal: Allows a user to become familiar
with the Instrument off the water.
• Demo: Simulates a boat moving along a
route and automatically displays different
Instrument functions.
To start and stop Simulate mode, and for more
information, see section 19-16. In simulate
mode, Simulate or Demo flashes at the bottom
of the window.
!
WARNING
Never have Simulate mode on when using
the Instrument to navigate on the water.