NorthStar Navigation 538 GPS Receiver User Manual


 
Northstar Explorer 538i/538 Installation and Operation Manual
38
Press once or more until the Setup
menu is displayed, then select System:
Language
Select the language for the displays. The options
are: English, Italian, French, German, Spanish,
Dutch, Swedish, Portuguese, Finnish and Greek.
Tip: In case you can’t read the current
language, the language setting is found at the
top of the system menu.
14-1 Setup > System
14 Setting up the Explorer 538/538i
The Explorer 538/538i has a number of advanced
features which are set up through the setup
menu. We recommend that you become familiar
with the operation of the unit using the default
settings before making any changes to the data
in these menus.
To go to a setup option menu, press
one
or more times to display the setup menu, then
select an option.
Note:
1 The Setup menu options are explained in the
following sections.
2 Section 2-1 describes how to set or change
data in the setup menus.
3 The setup data available will depend on the
optional sensors and instruments installed.
Backlight
Select the backlight level for the keys and display
(see also section 2-4)
Night mode
Night mode sets the palette for all displays.
Normal palette, for daytime
All displays have a palette optimised for night
time.
See also section 2-4. To change only the chart
palette, see section 17-2.
Key beep
Enables or disables the beep when a key is pressed.
Auto power off
See section 2-3.