Nissan 2010 Z Roadster Automobile User Manual


 
Black plate (95,1)
Model "Z34-D" EDITED: 2009/ 9/ 10
. Any liquid spilled on the heated seat
should be removed immediately
with a dry cloth.
. When cleaning the seat, never use
gasoline, thinner, or any si milar
materials.
. If any abnormalities are found or the
heated seat does not operate, turn
the switch off and have the system
checked by a NISSAN dealer.
SIC2770
The front seats are warmed by built-in heaters.
The switches located on the center console can
be operated independently of each other.
1. Start the engine.
2. Select the desired heat range.
. For high heat, push the HI side of the
switch
*
1
.
. For low heat, push the LO side of the
switch
*
2
.
. The indicator light
*
3
will illuminate
when the heater is on.
3. To turn off the heater, return the switch to
the level position . Make sur e that the
indicator light turns off.
The heater is controlled by a thermostat,
automatically turning the heater on and off.
The indicator light will remain on as long as
the switch is on.
When the vehicle’s interior is warmed, or
before you leave the vehicle, be sure to turn
off the switch.
Instruments and controls 2-35