Black plate (149,1)
Model "Z34-D" EDITED: 2009/ 9/ 10
SPA2143
Manual anti-glare type
The night position
*
1
will reduce glare from the
headlights of vehicles behind you at night.
Use the day position
*
2
when driving in daylight
hours.
WARNING
Use the night position only when ne-
cessary, because it reduces rear view
clarity.
SPA2450
Automatic anti-glare type
The inside mirror is designed so that it
automatically changes reflection according to
the intensity of the headlights of the following
vehicle.
The anti-glare system will be automatically
turned on when the ignition switch is pushed
to the ON position.
When the anti-glare system is turned on, the
indicator light
*
A
will illuminate and excessive
glare from the headlights of the vehicle behind
you will be reduced.
Push the “*” switch
*
C
to make the inside
rearview mirror operate normally. The indicator
light will turn off. Push the “I” switch
*
D
to turn
the system on.
Do not allow any object to cover the
sensors
*
E
or apply gl ass cleaner on
them. Doing so will reduce the sensitivity
of the sensor, resulting in improper opera-
tion.
For the HomeLink
®
Universal Transceiver opera-
tion, see “HomeLink
®
UNIVERSAL TRANSCEI-
VER” in the “2. Instruments and controls”
section.
Pre-driving checks and adjustments 3-37