Filter
Top Products
Black plate (128,1)
Model "Z34-D" EDITED: 2009/ 9/ 10
Switching procedure:
To switch the hazard indicator and horn (chime)
operation, push the LOCK
*
1
and UN-
LOCK
*
2
buttons on the Intelligent Key
simultaneously for more than 2 seconds.
. When the hazard indicator mode is set, the
hazard indicator flashes 3 times.
. When the hazard indicator and horn mode is
set, the hazard indicator flashes once and
the horn chirps once.
SPA2572
1. Pull the hood lock release handle
*
1
located below the instrument panel; the
hood will then spring up slightly.
2. Pull the lever
*
2
up at the front of the hood
with your fingertips and raise the hood.
3. Hold the insulator
*
3
of the support rod
and insert its end into the slot
*
4
on the
front edge of the hood.
4. When closing the hood, store the support
rod to its original position, then slowly close
the hood and make sure it locks into place.
WARNING
. Make sure the hood is completely
closed and latched before driving.
Failure to do so could cause the
hood to fly open and result in an
accident.
. If you see steam or smoke coming
from the engine compartment, to
avoid injury do not open the hood.
HOOD
3-16 Pre-driving checks and adjustments