Black plate (37,1)
Model "Z34-D" EDITED: 2009/ 9/ 10
SSS0929
TOP TETHER STRAP CHILD RE-
STRAINT (for Coupe models)
If the manufacturer of your child restraint
requires the use of a top tether strap, it must
be secured to an anchor point.
WARNING
. The child restraint anchor point is
designed to withstand only those
loads imposed by correctly fitted
child restraints. Under no circum-
stances is it to be used for adult
seat belts or harnesses.
. Do not allow cargo to contact the
top tether strap when it is attached
to the top tether anchor. Properly
secure the cargo so it does not
contact the top tether strap. Cargo
that is not properly secured or that
contacts the top tether strap may
damage the top tether strap during
a collision. Your child could be
seriously injured or killed in a colli-
sion if the child restraint top tether
strap is damaged.
Top tether anchor point location
The Anchor point is located on the floor of the
cargo area.
Installing top tether strap
First, secure the child restraint with the seat belt.
Flip down the flap marked with a label as shown
in the illustration. Position the top tether strap
over the top of the seatback and secure it to the
tether anchor bracket that provides the straight-
est installation. Tighten the strap according to
the manufacturer’s instructions to remove any
slack.
If you have any questions when installing a
top tether strap child restraint, consul t
your NISSAN dealer for details.
SSS0100
CHILD RESTR AINT INSTALLATION
USING THE SEAT BELTS (for Coupe
models)
WARNING
. Even with the NISSAN Advanced Air
Bag System, never install a rear-
facing child restraint in the front
passenger seat. Supplemental front
air bags inflate with great force. A
rear-facing child restraint could be
struck by the supplemental front air
bag in a crash and could seriously
injure or kill your child.
Safety — Seats, seat belts and supplemental restraint system 1-19