Filter
Top Products
Black plate (391,1)
Model "Z34-D" EDITED: 2009/ 9/ 10
STI0618
EXCEPT FOR NISMO MODELS
Use the following steps to mount the license
plate:
Before mounting the license plate, confirm that
the following parts are enclosed in the plastic
bag.
. License plate bracket
. J-nut 6 2
. Screw 6 2
. Screw grommet 6 2
1. Park the vehicle on flat, level ground. Locate
the two dents
*
A
on the front bumper.
Carefully drill two pilot holes using a 0.39 in
(10 mm) drill bit. (Be sure that the drill
only goes through the bumper fascia.)
2. Insert grommets into the hole on the bumper
fascia.
3. Insert a flat-blade screwdriver into the
grommet hole to add 908 turn onto the part
*
B
.
4. Make sure the side end surface of the
license plate bracket is aligned with the
bumper
*
C
.
INSTALLING FRONT LICENSE PLATE
Technical and consumer information 9-13