Filter
Top Products
Chapter 4 Using NI-IMAQ for IEEE 1394 Cameras in LabVIEW
NI-IMAQ for IEEE 1394 Cameras User Manual 4-8 ni.com
Figure 4-7. Displaying an Image Using an Image Control
If you have IMAQ Vision for LabVIEW, you can display an image in an
external window using IMAQ WindDraw, located at Vision»
Vision Utilities»External Display. Use IMAQ WindDraw when you need
more image size and location control.
Figure 4-8 illustrates using IMAQ WindDraw to display an image acquired
using IMAQ1394 Snap. You can display images in the same way using any
acquisition type. For more information about the display capabilities of
IMAQ Vision, refer to the IMAQ Vision for LabVIEW User Manual.
Figure 4-8. Displaying an Image Using IMAQ WindDraw
If you have LabVIEW RT, you can use IMAQ RT Video Out, located at
Vision»Vision Utilities»IMAQ RT, to display an image on the monitor
connected to your RT device. Use IMAQ Video Out Display Mode, located
at Vision»Vision Utilities»IMAQ RT, to configure the monitor for
display. Figure 4-9 illustrates configuring the monitor and displaying an
image acquired with IMAQ1394 Snap.
Figure 4-9. Displaying an Image Using RT Video Out
Note The IMAQ RT Video Out VI is available only on RT devices with Intel i815 or i845
video chipsets. These devices include NI CVS-1450 Series devices, PXI-817x controllers,
and PXI-818x controllers.