Murphy HV1000 GPS Receiver User Manual


 
Section 78 00-02-0604
02-01-07 - 28 -
Specifications
Electrical
Display 6.4” Color transmissive TFT LCD
Resolution VGA, 640 x 480 pixels
Orientation Landscape
Backlighting CCFL, 350 cd/m² (50,000 h lifetime) not replaceable
Processor
Sharp ARM9 LH7A404, 200 MHz
Philips ARM7 LPC2194 70 MHz
Flash Memory 16 Mbytes
RAM 32 Mbytes SDRAM
EEPROM 32 Kbytes
Operating Voltage
6 to 32 VDC, protected against
reverse polarity and load-dump
Power Consumption
10 W full backlight
22 W full backlight with heater (< -10º C)
CAN
4 CAN ports according to CAN specification 2.0B.
One port isolated according to NMEA 2000
RS-485 2 MODBUS Master ports at 38.4 Kbaud
Protocols J1939, NMEA 2000, proprietary
Connection 4 Deutsch DT04-6P 6-pin connectors
Keyboard 8 Capacitive Touch Keys
Mechanical
Mounting Variants
Panel Mounting – Mounts with eight screws into the lip of the bezel.
Gimbal Mounting – Uses an articulating gimbal.
Dimensions
(W x H) 8.74 x 7.23 in
Panel Mount Depth – 0.605 in
Unit Depth – 3.265 in
Cutout for panel mounting (W x H) 7.15 x 5.65 in
Case Material
High impact acrylic front case
Polycarbonate back case
Weight 2 lb