Filter
Top Products
Section 78 00-02-0604
02-01-07 - 10 -
Product Features
Power Up
The HelmView display is most frequently installed with power connected to the ignition. When
the ignition is turned on, the HelmView display powers up and the engine health statistics can
be viewed via preset gauges. To see more gauge screens, press the Next or Previous
buttons.
Main Menu
The main menu is activated at any time by pressing the Menu key on the display.
The following features are accessed through the main menu:
• Gauge Display – provides a series of screens that display engine and auxiliary
information in a variety of formats.
• GPS Display – displays detailed charts, trails and waypoints if used with the optional
GPS kit.
• Engine Diagnostics – displays a list of engine fault codes, descriptions, and on some
engines corrective action will be shown.
• User Settings – allows you to customize the display options for ambient light and
brightness, set US or metric units, specify the Home screen and screen setup status.
• Utilities – allows configuration of the unit including wire configuration, plug address,
fault conversion, CAN data, and fault codes. Also displays software version information
at the top of the page.
• GPS Utilities – contains options to set up track and position, chart and time, and
waypoint manager. Also displays satellite status.