Filter
Top Products
27
SPEEDOMETER CALIBRATION
Quick Cal Calibration
Quick Cal – This calibration is for setting lighting and contrast.
1. Press in the
MODE
and
TROLL
+
buttons for up to 2 seconds to get
to Quick Cal screen.
2. Press
MODE
to advance through the calibration selections.
CAL 1 Speedometer Calibration
Cal 1 – This calibration lets you turn on and off the system screens.
NOTE:Screens may vary depending upon the version of the gauge.
1. Press in the
MODE
and
TROLL
+
buttons and hold for approxi-
mately 7 seconds until you see the Cal 1 screen.
2. Press
MODE
to advance through the calibration selections.
REMOTE LCD LIGHT?
[NO]
[YES]
[SAVE]
Enables you to set the lighting levels
on all the SC1000 simultaneously from
this gauge.
REMOTE LCD CONTRAST?
[NO]
[YES]
[SAVE]
Enables you to control the contrast
from another System TACH/Speed
simultaneously from this gauge.
TIME
[NO]
[EDIT]
[SKIP]
Allows you to set the time. You must se-
lect edit to format the time. If a GPS is
connected to the system you cannot
edit time using this function.
TIME FORMAT
[DOWN]
[UP]
[SAVE]
Choose between a 12 hour and 24 hour
format. The 12 hour format displays the
date as month-day-year. The 24 hour
format displays the date as day-month-
year.
(continued on next page)