Filter
Top Products
WARNING SYSTEM
4
Alarm Warnings
NOTE: Alarm warnings are displayed as shown when used with
engines prior to Gen I (2007).
3200
RPM
AL
b
c
22663
MODE
RPM x 1000
0
2
3
4
5
6
7
1
RESET
TROLL
+
TROLL
-
MODE
SPEED
0
20
30
40
50
60
70
10
RESET
TROLL
+
TROLL
-
a
REDUCE
THROTTLE
a - Display screen
b - Engine Guardian System
c - Alarm signal
When a problem is detected, the name of the offending alarm
appears on the display.
If problem can cause immediate engine damage, the Engine
Guardian System will respond to the problem by limiting engine
power. Immediately reduce the throttle speed and refer to the
warning messages on the following pages. Refer to the Engine
Operation, Maintenance, and Warranty Manual for further
explanation of the problem and the correct action to take.
The alarm message will stay displayed until the "MODE" button is
pressed. If there are multiple alarms, these will cycle on the display
at five-second intervals.
If the "MODE" button is pressed to display a different screen, the
flashing alarm signal "AL" will appear in the upper right corner to
indicate there still is a problem.