Filter
Top Products
SPEEDOMETER CALIBRATION
22
Speedometer Quick CAL Calibration
SPEED
0
20
30
40
50
60
70
10
RESET
TROLL
-
MODE
+
TROLL
24159
SC1000 System Speedometer
This calibration is for setting the lighting and contrast.
1. Press the "MODE" and "+" buttons simultaneously for two
seconds to bring up the Quick Cal display screen.
2. Press the "-" or "+" button to select the option choice displayed
in the [ ] brackets on the screen.
3. Press "MODE" ["SAVE"] to save the setting and advance
through the calibration selections.
Quick CAL
LIGHT
(DOWN)
(SAVE) ( UP )
23517
Adjusts the brightness of the gauge lighting.
CONTRAST
(DOWN)
(SAVE) ( UP )
23519
Adjusts the contrast of the display screen.
Speedometer CAL 1 Calibration
This calibration allows you to turn on and off the system display
screens.
NOTE: Screens may vary depending on your engine type.
1. Press the "MODE" and "+" buttons simultaneously for
approximately six seconds to bring up the Cal 1 display
screen.