Filter
Top Products
47
Getting started
Driving
Turn signals and high beam
The combination switch is on the left of the
steering column.
Combination switch
1 Turn signals, right
2 Turn signals, left
̈ Press the combination switch up 1 or
down 2.
High beam
̈ Push the combination switch forward.
The high beam headlamps are switched
on. The high beam headlamp
indicator A in the instrument clus-
ter comes on.
For more information, see “High beam
flasher” (
୴ page 121).
Windshield wipers
The combination switch is located on the
left of the steering column.
Combination switch
1 Single wipe
2 Switching on windshield wipers
̈ Make sure the ignition is switched on.
i
To signal minor directional changes,
move combination switch to point of
resistance only and release. The turn
signal flashes three times.