Filter
Top Products
143
Controls in detail
Control system
Setting locator lighting
During darkness, the following lamps will
come on when the exterior lamp switch is
in position U, the locator lighting fea-
ture is activated, and the vehicle is un-
locked by SmartKey:
ț the parking lamps
ț the tail lamps
ț the license plate lamps
ț the front fog lamps
To activate locator lighting:
̈ Make sure the locator lighting feature
is set to
On
(see below).
̈ Turn the exterior lamp switch to posi-
tion U.
The locator lighting switches off when the
driver’s door is opened. It switches off au-
tomatically after a period of approximately
40 seconds.
̈ Move the selection marker with button
æ or ç to the
Lighting
sub-
menu
̈ Press button j or k repeatedly
until you see this message in the left
display:
Locator lighting
.
The selection marker is on the current
setting.
̈ Press æ or ç to select the de-
sired setting.
The locator lighting will be switched on
or off.
Setting night security illumination
(Exterior lamps delayed switch-off)
Use the
Headlamps delayed switch-off
function to set whether and for how long
you would like the exterior lamps to illumi-
nate during darkness after all doors are
closed. When the delayed switch-off fea-
ture is activated and the exterior lamp
switch is in position U before the en-
gine is turned off, the following lamps will
remain lit after you remove the SmartKey
from the starter switch:
ț the parking lamps
ț the tail lamps
ț the license plate lamps
ț the front fog lamps
To activate night security illumination:
̈ Select delayed switch-off period (see
below).
̈ Turn the exterior lamp switch to posi-
tion U before turning off the engine.