108
Controls in detail
Seats
Moving the seats forward and
backward
You can move the seats forward and back
to facilitate loading and unloading.
The switch is located on the top side of the
seat.
1 Seat forward
2 Seat backward
Moving the seat forward
̈ Press switch at 1.
Moving the seat backward
̈ Press switch at 2.
Lumbar support
You can adjust the contour of the seat’s
lumbar support to best support your spine.
The thumbwheel is located on the lower
side of the seat.
1 Thumb wheel
̈ Make sure the ignition is switched on.
All the lamps in the instrument cluster
come on.
̈ Set the lumbar support between 0
and 5.
Warning! G
When moving the seats, be sure that no one
can be caught by them. Never place hands
under seat or near any moving parts during
a seat adjustment procedure. To stop the
seat from moving when potential danger ex-
ists:
ț press the switch again
ț move the seat adjustment switch on the
door (୴ page 34)
!
When moving the seats, make sure that
there are no items in the footwell or be-
hind the seats. Otherwise you could
damage the seats.