Filter
Top Products
Display messages Possible causes/consequences and M Solutions
+
Key Not Detected
(white display
message)
The KEYLESS-GO key cannot be detected at present.
X
Change the location of the SmartKey with the KEYLESS-GO
functions in the vehicle.
If the KEYLESS-GO key is still not detected:
X
Change the location of the SmartKey with the KEYLESS-GO
functions in the vehicle.
X
Operate the vehicle with the key in the ignition lock if necessary.
+
Key Detected In
Vehicle
The KEYLESS-GO key has been detected inside the vehicle during
locking.
X
Remove the KEYLESS-GO key from the vehicle.
+
Pull starting
button out then
insert key
The KEYLESS-GO key can continuously not be detected.
X
Insert the SmartKey into the ignition lock and turn it to the
desired position.
X
Visit a qualified specialist workshop.
Warning and indicator lamps in the instrument cluster
Apply the brakes.
Problem Possible causes/consequences and M Solutions
$ (USA only)
J (Canada only)
The red brake system
warning lamp comes on
while the vehicle is
moving. A warning tone
also sounds.
You are driving with the parking brake engaged.
X
Release the parking brake.
The warning lamp goes out and the warning tone ceases.
$ (USA only)
J (Canada only)
The red brake system
warning lamp comes on
while the engine is
running. A warning tone
also sounds.
G
Risk of accident
There is insufficient brake fluid in the fluid reservoir.
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions. Do not continue driving
under any circumstances.
X
Engage the parking brake.
X
Consult a qualified specialist workshop immediately.
X
Observe the additional display messages in the multifunction
display.
Do not add brake fluid. This will not rectify the malfunction.
236
Warning and indicator lamps in the instrument cluster
On-board computer and displays
BA 251 USA, CA Edition A 2011; 1; 3, en-US
d2sboike Version: 3.0.3.5
2010-04-16T14:31:55+02:00 - Seite 236