Filter
Top Products
Setting the seat fore-and-aft position
(outer seats in the 2nd row)
X
Pull lever : in the direction of the arrow to
the pressure point and hold it in this
position.
X
Slide the seat forwards or backwards to the
desired position.
X
Release lever :.
The seat engages audibly.
Adjusting the backrest angle
Outer seats, 2nd row
3rd row of seats
X
Pull lever : in the direction of the arrow to
the pressure point and hold it in this
position.
X
Press your back lightly against the backrest
to tilt it towards the rear.
or
X
Relieve the pressure on the backrest to
allow it to fold forwards.
X
Release lever : once the backrest is in the
desired position.
X
Lean back firmly against the backrest to
ensure that it is engaged.
Adjusting the armrest (2nd row of
seats)
6-seat vehicles
You can fold the armrests in the 2nd row of
seats up, e.g. when loading the vehicle, and
adjust their height.
X
To fold up: fold the armrest up until it
engages in the vertical position.
X
To adjust the height: gently push the
engaged armrest backwards to release it.
X
First fold the armrest all the way down to
its lowest position and then back up to the
desired position until it engages.
i
If you want to lower the armrest, you must
first fold it up. Then adjust the height as
described above.
7-seat vehicles
The backrest of the center seat in the 2nd row
can be used as an armrest.
G
Warning
The folded second-row middle seat is
intended to serve as an armrest only. Do not
fold the second-row middle seat and allow
occupants to use the folded second-row
middle seat as a footrest while driving. All
vehicle occupants must keep both feet on the
floor in front of their seat. Otherwise,
occupants could slide under the seat belt in a
collision. If occupants slide under it, the belt
104
Seats
Seats, steering wheel and mirrors
BA 251 USA, CA Edition A 2011; 1; 3, en-US
d2sboike Version: 3.0.3.5
2010-04-16T14:31:55+02:00 - Seite 104