Filter
Top Products
X
To remove: pull the head restraint up to
the stop.
X
Press release catch : and pull the head
restraint out of the guides.
X
To re-install: insert the head restraint so
that the notches on the bar are on the left
when viewed in the direction of travel.
X
Push the head restraint down until you hear
it engage in position.
Adjusting the multicontour seat
You can adjust the contour of the front seats
individually so as to provide optimum support
for your back and sides.
X
Make sure that the key is in position 2 in
the ignition lock.
X
Use switch : to move the thigh cushion
into the desired position.
X
Press the W or X button to adjust the
contour of the backrest to suit your back.
X
Press button ? to move the point of
greatest backrest curvature downwards to
the lumbar region and press button = to
move it upwards to the upper back region.
X
Use button ; to adjust the side bolsters
for optimal lateral support.
Adjusting the four-way lumbar
support
The lumbar support for the driver's seat can
be individually adjusted to provide optimum
support for your back.
:
To raise the backrest contour
;
To soften the backrest contour
=
To lower the backrest contour
?
To harden the backrest contour
Switching the seat heating on/off
Switching on/off
G
Warning!
Repeatedly setting the seat heating to level
3 may result in excessive seat temperatures.
The health of passengers that have limited
temperature sensitivity or a limited ability to
react to excessively high temperatures may
be affected or they may even suffer burn-like
injuries. Therefore, do not use seat heating
level 3 repeatedly.
The three red indicator lamps in the button
indicate the heating level you have selected.
i
If the battery voltage is too low, the seat
heating may switch off.
One or several indicator lamps in the seat
heating button flash.
Seats
97
Seats, steering wheel and mirrors
BA 164.1 USA, CA Edition B 2011; 1; 2, en-US
d2mskot Version: 3.0.3.5
2010-04-21T17:25:06+02:00 - Seite 97
Z