Filter
Top Products
Multifunction display
To activate the multifunction display:
R
switch on the ignition.
R
switch on the lights.
R
open the driver's door.
R
press the . reset button in the instrument
cluster.
Values and settings as well as display
messages are shown in the multifunction
display.
:
Display area for menus or submenus
;
Gear indicator
=
Transmission mode display
?
Status bar with outside temperature or
speed (Y page 214)
Further information on the gear indicator
(Y page 145).
206
Displays and operation
On-board computer and displays
BA 164.1 USA, CA Edition B 2011; 1; 2, en-US
d2mskot Version: 3.0.3.5
2010-04-21T17:25:06+02:00 - Seite 206