Filter
Top Products
Inserting the lashing eyelets into the
mounting
G
Warning!
Distribute the load on the cargo tie down rings
evenly. Please observe the loading guidelines.
X
Turn mounting element ; in the loading
rail to =.
X
Insert cargo tie-down ring : into mounting
element ;.
X
Turn mounting element ; to & until
you feel it clearly engage in the loading rail.
Belt retractor
The inertia reel can be used to secure light
loads against the side wall of the cargo
compartment to prevent them from moving
around.
X
Insert two mounting elements ; into a
loading rail.
X
Turn mounting elements ; in the loading
rail to =.
X
Insert inertia reel = into mounting
elements ;.
X
Turn mounting element ; to & until
you feel it clearly engage in the loading rail.
X
Press unlocking button : on inertia reel
= and pull the cargo net out in the
direction of the arrow.
X
Place the load between the securing net
and the cargo compartment side wall.
X
Using one hand, press locking button : of
inertia reel =.
X
With your other hand, slowly extend the net
around the load until it is secure.
Telescopic rod
The telescopic rod can be used to secure the
load against the rear seats to prevent it from
moving around.
X
Insert one mounting element ; into each
loading rail.
X
Turn mounting elements ; in the loading
rail to =.
X
Insert telescopic rod : into mounting
elements ;.
X
Turn mounting element ; to & until
you feel it clearly engage in the loading rail.
264
Stowage areas
Loading, stowing and features
BA 164.1 USA, CA Edition B 2011; 1; 2, en-US
d2mskot Version: 3.0.3.5
2010-04-21T17:25:06+02:00 - Seite 264