Mercedes-Benz 2010 ML-Class Automobile User Manual


 
Position C represents the charged battery of
another vehicle or an equivalent starter pack.
X
Flip up cover : of positive terminal = in
direction of arrow.
!
Never invert the terminal connections!
X
Connect positive terminal ; of charged
battery C with positive terminal = with a
jumper cable. Clamp the cable to positive
terminal ; of charged battery C first.
X
Start engine of the vehicle with charged
battery C and run at idle speed.
X
Slide cover A from negative terminal B in
direction of arrow.
X
Connect negative terminal ? of charged
battery C with negative terminal B with
a jumper cable. Clamp the cable to
negative terminal ? of charged battery
C first.
X
Start engine of the vehicle with the
discharged battery and run at idle speed.
You can now turn on the electrical
consumers. Do not switch on the
headlamps under any circumstances.
X
Remove the jumper cables from negative
terminals ? and B first.
X
Remove the jumper cables from positive
terminals ; and =.
You can now switch on the headlamps.
X
Close cover : of positive terminal =.
X
Slide cover A back onto negative terminal
B.
X
Have the battery checked at the nearest
authorized Mercedes-Benz Center.
Towing the vehicle
Safety notes
Mercedes-Benz recommends that the vehicle
be transported with all wheels off the ground
using flatbed or appropriate wheel lift/dolly
equipment. This method is preferable to other
types of towing.
G
Warning!
HYBRID vehicles: It is imperative that you read
the HYBRID Supplemental Operating
Instructions included in your vehicle literature
338
Towing the vehicle
Practical hints
164_AKB; 7; 31, en-US
d2ureepe, Version: 2.11.8.1
2009-09-11T12:07:36+02:00 - Seite 338