Filter
Top Products
Opening the passenger-side trim panel
X
Insert a suitable object such as a coin into
the slot of lock :.
X
Turn lock : by 90° in direction of the
arrow.
X
Remove cover ;.
Replacing bulbs
Example illustration: Standard rear lamp driver’s
side
:
Brake lamp bulb socket
;
Rear turn signal lamp bulb socket
=
Side marker lamp bulb socket
?
Tail lamp, parking and standing lamp and
rear fog lamp (driver’s side only) bulb
socket
A
Backup lamp bulb socket
Example illustration: LED rear lamp driver’s side
:
Backup lamp bulb socket
;
Rear fog lamp bulb sockets (driver’s side
only)
X
Depending on which bulb needs to be
replaced, turn the respective bulb socket
counterclockwise.
X
Pull the bulb socket out of the housing.
X
Standard rear lamp: Gently press onto the
bulb and turn it counterclockwise out of its
bulb socket.
LED rear lamp: Pull the bulb out of its bulb
socket.
X
Standard rear lamp: Gently press the new
bulb into its bulb socket and turn it
clockwise until it engages.
LED rear lamp: Gently press the new bulb
into its bulb socket.
X
Align the bulb socket and turn it clockwise.
X
Make sure the bulb socket is attached
properly.
X
Close the respective cover in the cargo
compartment.
X
Close the tailgate.
316
Replacing bulbs
Practical hints
164_AKB; 7; 31, en-US
d2ureepe, Version: 2.11.8.1
2009-09-11T12:07:36+02:00 - Seite 316