Mercedes-Benz 2010 ML-Class Automobile User Manual


 
tie-down rings in the cargo compartment
(Y page 188).
X
Open the hook and loop fasteners on the
cargo net package.
X
Roll out the cargo net.
X
Unfold the cargo net.
X
Engage the upper cargo net bar.
The cargo net bar must engage audibly.
Installing the cargo net
Cargo net installed behind the C-pillar
X
Hang cargo net bar ; on holder : as
indicated by the arrow.
X
Push cargo net bar ; forward into
holder : in direction of arrow.
X
Engage lower cargo net bar.
The cargo net bar must engage audibly.
Pulling the cargo net tight
Belt hook attached behind the rear seat backrests
X
Hook belt hook : into cargo tie-down
ring ; in direction of arrow.
X
Pull tightening belt = by the loose end in
direction of arrow until the cargo net is
pulled tight.
X
After driving a short distance, make sure
the cargo net is still tight and, if necessary,
pull it tight again.
Loosening the cargo net
Belt hook attached behind the rear seat backrests
X
Loosen the tightening belt by pulling
buckle : upward in direction of arrow.
X
Remove belt hook ; from cargo tie-down
ring =.
Removing and storing the cargo net
X
Take cargo net bar ; (Y page 192) out of
holder : (Y page 192).
X
Press the red button on the upper and lower
cargo net bar.
X
Fold the cargo net.
X
Roll up the cargo net.
X
Close the hook and loop fasteners on the
cargo net package.
Front storage compartments
G
Warning!
To help avoid personal injury during a collision
or sudden maneuver, exercise care when
192
Loading and storing
Controls in detail
164_AKB; 7; 31, en-US
d2ureepe, Version: 2.11.8.1
2009-09-11T12:07:36+02:00 - Seite 192