Filter
Top Products
Storage position
X
Take the reversible ratchet from the vehicle
tool kit (Y page 268).
Operational position
X
Attach reversible ratchet ; to jack : in
such a way that the word UP can be seen.
Before placing the jack and the reversible
ratchet back into the vehicle tool kit:
X
Fully collapse the jack (storage position).
X
Remove the reversible ratchet.
Spare wheel
G
Observe Safety notes, see page 319.
i
USA only:
The ML 350 BlueTEC 4MATIC does not have
a spare wheel.
i
Canada only:
The ML 350 BlueTEC 4MATIC does not have
a spare wheel. ML 350 BlueTEC 4MATIC
vehicles that are factory equipped with 20''
wheels come with TIREFIT.
The spare wheel is located in the space
underneath the cargo compartment floor.
X
Removing: Open the tailgate (Y page 75).
X
Lift the cargo compartment floor and
secure it on the upper cargo compartment
lip (Y page 268).
!
To prevent damage, always disengage the
securing hook from upper cargo
compartment lip and lower the cargo
compartment floor before closing the
tailgate.
X
Remove the storage well casing (if so
equipped) (Y page 270).
Example illustration
X
Remove retaining screw : by turning it
counterclockwise.
X
Remove spare wheel ;.
For information on mounting the spare wheel,
see “Flat tire” (Y page 319).
Storing the spare wheel after use
X
Place spare wheel ; into the spare wheel
well (Y page 271).
X
Secure spare wheel ; by turning retaining
screw : clockwise (Y page 271).
X
Place the storage well casing (if so
equipped) into the spare wheel
(Y page 270).
Where will I find ...?
271
Practical hints
164_AKB; 7; 31, en-US
d2ureepe, Version: 2.11.8.1
2009-09-11T12:07:36+02:00 - Seite 271
Z