Mercedes-Benz 2010 ML-Class Automobile User Manual


 
X
Rolling out: Pull cargo compartment cover
blind on handle : across the cargo
compartment.
X
Guide cargo compartment cover blind into
mounts ; and release.
X
Rolling up: Disengage cargo compartment
cover blind and guide retraction by its
handle :.
Before removing or installing cargo
compartment cover blind behind the rear
seats, fold the left or right rear seat forward
(Y page 189). Afterwards, return the left or
right rear seat into its original position.
X
Removing: Roll up cargo compartment
cover blind.
X
Push release button =.
X
Pull cargo compartment cover blind ? to
the left.
X
Remove cargo compartment cover blind.
X
Installing: Make sure release button =
faces up and handle : is to the rear before
inserting the cargo compartment cover
blind.
X
Place left side of cargo compartment cover
blind in left mount.
X
Position right side of cargo compartment
cover blind over right mount.
X
Press release button = and guide cargo
compartment cover blind into mount.
X
Make sure cargo compartment cover blind
is securely fastened.
Cargo net
G
Warning!
Make sure the cargo net is properly engaged
at top and bottom position and the tightening
belts are securely fastened.
Never use a damaged cargo net.
Always use cargo net when transporting
cargo. This helps to avoid personal injury from
smaller objects being thrown around in the
occupant compartment during a collision or
sudden maneuver.
The cargo net cannot prevent the movement
of large, heavier objects into the passenger
compartment in an accident. Such items must
be properly secured using the cargo tie-down
rings in the cargo compartment floor.
Passenger use of seats behind installed cargo
net is restricted because of the footwell being
taken up by the net.
Use of the cargo net is a particularly
important safety factor when the vehicle is
loaded higher than the top of the seat
backrests with smaller objects. For your
safety, always use the cargo net when
transporting cargo.
The cargo net can be installed behind the
B-pillar or the C-pillar.
R
With the cargo volume expanded
(Y page 189), use holders : behind
B-pillars and the cargo tie-down rings in the
second-row footwell (Y page 189).
R
Without the cargo volume expanded, use
holders ; behind C-pillars and the cargo
Loading and storing
191
Controls in detail
164_AKB; 7; 31, en-US
d2ureepe, Version: 2.11.8.1
2009-09-11T12:07:36+02:00 - Seite 191
Z