Filter
Top Products
79
Safety and Security
Occupant safety
Installation of infant and child restraint
systems
This vehicle is equipped with a tether an-
chorage for a top tether strap behind the
passenger seat.
1 Cover of anchorage ring
̈ To have better access to the anchorage
ring, move the passenger seat forward
(
୴ page 42).
̈ Remove cover 1 in direction of the
arrow from anchorage ring 3.
̈ Guide tether strap according to the
child restraint manufacturer’s
instructions.
̈ Make sure the tether strap is not
twisted.
2 Hook
3 Anchorage ring
̈ Securely fasten hook 2, which is part
of the tether strap, to anchorage
ring 3.
̈ For safety, make sure the hook has
attached to the ring beyond the safety
catch, as illustrated.
Warning! G
Children too big for a toddler restraint must
ride in seats using regular seat belts.
Position the shoulder belt across chest and
shoulder, not face or neck. A booster seat
may be necessary to achieve proper seat
belt positioning for children over 41 lb until
they reach a height where a lap/shoulder
belt fits properly without a booster.
When the child restraint is not in use,
remove it from the vehicle or secure it with
the seat belt to prevent the child restraint
from becoming a projectile in the event of
an accident.
Do not leave children unattended in the
vehicle, even if the children are secured in a
child restraint system. A child’s unsuper-
vised access to a vehicle could result in an
accident and/or serious personal injury.
୴୴