Filter
Top Products
202
Controls in detail
Open air
̈ Press on releases 2 in direction of the
arrow and pull wind screen 1 out
upwards.
Installing
1 Mounting
2 Recess
̈ Insert mountings 1 into recesses 2.
The mountings must audibly engage.
̈ Make sure the mountings are properly
engaged.
Removing
You can close the soft top without remov-
ing the wind screen.
1 Release
̈ Press on releases 1 in direction of the
arrow and pull the wind screen out
upwards.
̈ Store the wind screen back into the
trunk lid.
Linkage covers
The covers are located in a bag that is lo-
cated in the trunk.
̈ Take out bag in direction of arrow.
!
Always remove the soft top linkage covers
before closing the soft top. You could otherwise
damage the covers or the linkages.