Filter
Top Products
229
Controls in detail
Useful features
Dust cover Slipping dust cover on/off
̈ Place the rolled-up dust cover with its
dark grey side facing downwards on
the vehicle roof.
Make sure the FRONT label is facing
towards the front of the vehicle.
̈ Roll the side that is labelled FRONT
over the hood.
̈ Roll the rear part over the tail end of
the vehicle.
̈ Unfold the dust cover.
̈ On the rear right, pull down the dust
cover below the bumper.
̈ Pull down the dust cover on the right
side of the vehicle.
̈ On the front right, pull down the dust
cover below the bumper.
̈ On the rear left, pull down the dust
cover below the bumper.
̈ Pull down the dust cover on the left
side of the vehicle.
̈ On the front left, pull down the dust
cover below the bumper.
Warning! G
Allow the engine to cool down completely
before slipping the dust cover on your vehi-
cle. Otherwise you could be seriously
burned when coming into contact with the
hot exhaust system.
!
To avoid damage to the vehicle and the dust
cover, observe the following:
ț Use the dust cover only when the vehicle is
garaged.
ț Cover the vehicle only when the engine has
cooled down completely.
ț The vehicle as well as the dust cover must be
dry before slipping the dust cover on the
vehicle.
ț Make sure the dust cover is clean and dry
before inserting it in the bag provided with
the dust cover.
i
Clean the dust cover according to the care
label on the inside of the dust cover.
୴୴