Filter
Top Products
203
Controls in detail
Open air
Installing
The following describes the installation of
the driver’s side cover. The installation of
the passenger-side cover is identical but
mirror-inverted.
1 Cover
2 Tab
3 Bodywork
4 Sealing
̈ Open the trunk lid.
̈ Fit tabs 2 of cover 1 between
sealing 4 and bodywork 3.
5 Lock
6 Holder
7 Slot
̈ Press down on lock 5 and turn it
clockwise by 90°.
̈ Hold the lock in this position and insert
holder 6 into slot 7.
̈ Press down on the cover and turn the
lock counter-clockwise by 90°.
Warning! G
Do not use damaged covers. Damaged
covers could come loose while driving and
hit other road users.
!
Do not use damaged covers. Damaged
covers could come loose while driving and
damage the vehicle.
୴୴