Filter
Top Products
57
Getting started
Driving
Starting difficulties
If the engine does not start as described,
carry out the following steps:
̈ If you are starting the engine with the
SmartKey, turn SmartKey in starter
switch to position 0 and repeat starting
procedure.
̈ If you are starting the engine with
KEYLESS-GO*: Close any doors that
may be open to allow for better
detection of the SmartKey with
KEYLESS-GO*.
Or:
̈ Remove KEYLESS-GO* start/stop
button from starter switch (
୴ page 41).
̈ Start the engine with the SmartKey as
radio signals from another source may
be interfering with the SmartKey with
KEYLESS-GO*.
̈ Repeat the starting procedure
(
୴ page 54). Remember that extended
starting attempts can drain the battery.
̈ Get a jump start (୴ page 497).
If the engine does not start after several
starting attempts, there could be a mal-
function in the engine electronics or in the
fuel supply system.
̈ Contact an authorized Mercedes-Benz
Light Truck Center or call Roadside
Assistance.
Parking brake
1 Release handle
̈ Release the parking brake by pulling on
release handle 1.
The warning lamp ; (USA only)
or 3 (Canada only) in the
instrument cluster goes out.
Warning! G
When leaving the vehicle, always remove the
SmartKey or SmartKey with KEYLESS-GO*
from the starter switch, take it with you and
lock the vehicle. Do not leave children unat-
tended in the vehicle, or with access to an
unlocked vehicle. Children could release the
parking brake, which could result in an acci-
dent and/or serious personal injury.