Filter
Top Products
271
Controls in detail
Loading
Returning the rear seat backrest to
original position
1 Seat backrest
2 Seat cushion
̈ Fold seat backrest 1 rearward until it
engages.
The red indicator 5 (
୴ page 270)
should no longer be visible.
̈ Fold seat cushion 2 rearward until it
locks into position.
̈ Check for secure locking by pushing
and pulling on the seat backrest.
Cargo compartment cover blind
The cargo compartment cover blind can be
installed behind the rear seats.
1 Handle
2 Mount
Rolling out blind
̈ Pull blind on handle 1 across the car-
go compartment.
̈ Guide blind into mounts 2 and re-
lease.
Rolling up blind
̈ Disengage blind and guide retraction
by its handle 1.
Warning! G
If a red indicator is visible with the backrest
up, then the backrest is not properly locked
into position.
Always lock backrest in its upright position
when the rear seats are occupied, or the ex-
tended cargo compartment is not in use.
Check for secure locking by pushing and
pulling on the backrest.
!
With the cargo compartment cover blind in-
stalled, do not pile luggage higher than the lower
edges of the rear side windows.