Filter
Top Products
175
Controls in detail
Control system
̈ Drive a full circle at a vehicle speed of
between 3 mph and 6 mph (5 km/h
and 10 km/h).
When calibration was successful, the
following message appears in the mul-
tifunction display:
Compass Calibration
Completed Successfully
Audio search function
Use of the Audio search function to select
a radio station will enable you to start a
frequency scan (
Frequency
) (୴ page 160)
or select a radio station stored in memory
(
Memory
).
̈ Move the selection marker with
button æ or ç to the
Vehicle
submenu.
̈ Press button j or k repeatedly
until the message
Audio Search
Function
appears in the multifunction
display.
The selection marker is on the current
setting.
̈ Press button æ or ç to select
Frequency
or
Memory
.
Setting automatic central locking
Use this function to activate or deactivate
the automatic central locking. With the
automatic central locking system
activated, the vehicle is centrally locked at
vehicle speeds of approximately 9 mph
(15 km/h).
̈ Move the selection marker with
button æ or ç to the
Vehicle
submenu.
̈ Press button j or k repeatedly
until the message
Automatic Door
Locking
appears in the multifunction
display.
The selection marker is on the current
setting.
̈ Press button æ or ç to switch
the automatic central locking
On
or
Off
.
i
If the message
Compass Calibration
Completed Successfully
does not appear in
the multifunction display, drive another full
circle.
If calibration does not succeed within 3 minutes,
the message
Compass Calibration
appears
in the multifunction display again. Calibrating the
compass has failed due to outside influences.
Repeat compass calibration in a different
location.